For Reference: 3.0” = J300 FAMILY – 3.5”= J350 Family – 5.5”=J550 Family.
The last Three digits describe the family.
Side Pin Teeth
| wdt_ID | Pictures | Type | J200 | J225 | J250 | J300 | J350 | J400 | J450/J460 | J550 | J600 | J700 | APPLICATION | J800 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 |  |
Short | 1U3201 | 6Y6221 | 1U3251 | 1U3301 | 1U3351 | 7T3401 | 9W8451 | 9W8551 | 6I6601 | For high-impact jobbs and pry-out work (such as rock) | ||
| 2 |  |
Long | 1U3202 | 6Y3222 | 1U3252 | 1U3302 | 1U3352 | 7T3402 | 9W8452 | 9W8552 | 6I6602 | 4T4702 | For use in most general applications where breakage is not an issue | |
| 3 |  |
Long Tip | 1959209 | 1681253 | 1681301 | 1681351 | 1681401 | 1681451 | For use in low impact for low to medium abrasiveness | |||||
| 4 |  |
Heavy Duty Abrasion | 4T2203 | 6Y6223 | 9N4253 | 9N4303 | 9N4353 | 7T3403 | 9N4453 | 6Y2553 | 6I6303 | 9U9703 | Extra metal for longer wear life | 6I8803 |
| 5 |  |
Heavy Duty Long | 8E4222 | 9N4252 | 9N4302 | 9N4352 | 8E4402 | 9N4452 | 9N4552 | 7Y0602 | 3 to 5 times more wear life than standard tips | |||
| 6 |  |
Heavy Duty Penetration | 1359300 / 9N4303HD | 1441358 / 9N4353HD | 1359400 / 7T3403HD | 1386451 / 9N4453HD | 1386552 / 6Y2553HD | 1359600 | 1359700 | 3 to 5 times more wear life than standard tips | 1359800 | |||
| 7 |  |
Penetration | 1U3209 | 6Y8229 | 9J4259 | 9J4309 | 9J4359 | 6Y7409 | 9W8459 | 9W8559 | 7I7609 | 4T4709 | For use in densely compacted material (such as clay) | |
| 8 |  |
Penetration Extended | 1U3202V | 6Y3222V | 1U3252V | 1835300 / 1U3302V | 1681359 / 1U3352V | 16811409 / 7T3402V | 1590459 / 9W8452V | 1590559 / 9W8552V | 1590607 | 1711709 | Offers the perfect convination of strength and a prolonged penetration wear life | |
| 9 |  |
Twin Tiger | 1358208 | 1358228 | 1358258 | 1359308 | 1359357 | 1359408 | 1386458 | Use for severe digging in rock and frost | ||||
| 10 |  |
Sharp Center | 9W8209 | 9W8259 | 9W8309 | 9W2359 | 6Y5409 | 7T8459 | 9W6559 | Applications that require use in densely compacted material such as clay |
Side Pin Teeth Reference Chart
| wdt_ID | Family | Pocket Size | Machines |
|---|---|---|---|
| 1 | J200 | 20=2.0” | 416, 426, 428, 436, 910, 931, 935, 307 |
| 2 | J250 | 25=2.5” | 916-930, 936, 941, 943, 951, 953, 205 THRU 214,225,229,311,312,320 |
| 3 | J300 | 30=3.0” | 950,953B THRU 966, E180, 215, 235, 205 THRU 214, 315,320,322 |
| 4 | J350 | 35=3.5” | 966B, 977, 980, E180, E240, 213B, 215 THRU 229, 320,322,325,330 |
| 5 | J400 | 40=4.0” | 980G, 322, 325, 330 |
| 6 | J450 | 45=4.5” | 983, 988, 988B, 225, 229, E300, 235, 325, 330, 345, 350 |
| 7 | J550 | 55=5.5” | 988G, 992, 235, 245, 345, 350, 375 |
| 8 | J600 | 60=6.0” | 990, 992 |
| 9 | J700 | 70=7.0” | 992, 994 |
| 10 | J800 | 80=8.0” | 994 |
For Reference: 3.0” = J300 FAMILY – 3.5”= J350 Family – 5.5”=J550 Family.
The last Three digits describe the family.
Ripper Teeth
Ripper teeth are used in very hostile environments, making it necessary to purchase a quality brand. CTP Branded ripper teeth provide rapid penetration and aggressive ripping angle, along with increased impact resistance. Centerline teeth are used in conditions where penetration is not a problem, compared to penetration teeth which are used in conditions where penetration is difficult.
| wdt_ID | Part No. | Type | Application | Pin | Lock |
|---|---|---|---|---|---|
| 1 | 6Y0309 | Penetration | 951, 955, 140, 140G | 1368308 | 1140359 |
| 2 | 9W2451 | Centerline-Short | D8, D8K, D8L, D8N, D8R, D9, D9H, D9N, D9R | 6Y3394 | 8E4743 |
| 3 | 9W2452 | Centerline-Intermediate | D8, D8K, D8L, D8N, D8R, D9, D9H, D9N, D9R | 6Y3395 | 8E4744 |
| 4 | 4T5452 | Penetrator-Intermediate | D8, D8K, D8L, D8N, D8R, D9, D9H, D9N, D9R | 6Y3396 | 8E4745 |
| 5 | 6Y0352 | Centerline-Intermediate | D5, D6, D7, 973, 977, 983,14G,16G | 1140358 | 1140359 |
| 6 | 6Y0359 | Penetrator-Long | D5, D6, D7, 973, 977, 983, 14G, 16G | 1140358 | 1140359 |
| 7 | 4T4453 | Centerline-Long | D8, D8K, D8L, D8N, D8R, D9, D9H, D9N, D9R | 6Y3394 | 1140359 |
| 8 | 4T4501 | Centerline-Short | D9L, D10, D11 | 6Y1204 | 6Y1202 |
| 9 | 4T4502 | Centerline-Intermediate | D9L, D10, D11 | 6Y1204 | 6Y1202 |
| 10 | 4T5501 | Penetrator-Short | D9L, D10, D11 | 6Y1204 | 6Y1202 |
Ripper Shanks
| wdt_ID | Machine Model | Shank | Protector | Center Ring | Pin and Washer | Center Ring | Pin and Washer | Tooth | Center Pin | Pin and Washer |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 931, 933, 939, D3, D4C, 135H, 120H | 8J5299 | 1U3209, 1U3201, 9W8209, 1U3202 | 8E6208, 8E6209 | ||||||
| 2 | 943, 953 | 1U1257 | 9J4259, 1U3251, 9W8259 | 8E6258, 8E6259 | ||||||
| 3 | 941, 951, 955, 963, 12, 14, 130, 140, 143H, 160H | 9J8913, 9J6586 | 4T4302, 6Y0309 | 8J1433 | 1368308, 1U2405 | |||||
| 5 | 16, 973, 977, D5, D6 | 9J8923, 9J3139 | 4T4352, 6Y0359 | 8E6358, 1U2405 | ||||||
| 7 | D7 | 9W7382 | 4T4352, 6Y0359 | 8E6358, 1U2405 | ||||||
| 8 | D7, D8, D9 | 7J2459 | 7J2352 7J2351 | 6J8811 | 7J3309, 7J3312 | 7J9600 | ||||
| 9 | D8K | 1073485, 1073486, 8E5346 | 8E1848 | 9W2452, 9W2452, 8E5570, 1140453, 4T5451, 4T5452, 8E5571 | 6Y3394, 8E4743 | |||||
| 12 | D8L | 8E5342, 8E5340 | 8E1848 | 9W2452, 9W2452, 8E5570, 1140453, 4T5451, 4T5452, 8E5571 | 6Y3394, 8E4743 | |||||
| 14 | D8N | 8E5347 8E5340 8E5346 | 8E1848 | 9W2452, 9W2452, 8E5570, 1140453, 4T5451, 4T5452, 8E5571 | 6Y3394, 8E4743 | |||||
| 15 | D9H | 1073485 1073486 8E5345 | 8E1848 | 9W2452, 9W2452, 8E5570, 1140453, 4T5451, 4T5452, 8E5571 | 6Y3394, 8E4743 |
