gasket-material

Selecting the right gasket material is vital for gasket performance.  Gaskets and seals primary functions are to compress and seal under high demand; compensating for mating surface irregularities at high temperatures and stresses.  As a guard against gas or fluid flow, gaskets have to function at a level that meets the needs of heavy machinery as well have a wide variety of types to choose from.

CTP offers a large selection of N-8092 Gasket Material from Interface Solutions™ that fits a plethora of applications, and our sales experts are always happy to help on choosing the right material for gaskets from your first question to your last.

Why does CTP choose N-8092?

  • N-8092 is produced at a higher minimum density (40% more) than N-8094 (8092 = 1.20 g/cc or 75 lbs./cu.ft. min. versus 8094 = 0.87 g/cc or 54 lbs/cu.ft. min).
  • N-8092 has a tighter pore structure that will resist permeation of fluids much better than N-8094.
  • N-8092 seals oil at almost half the required load needed to seal N-8094 at the same gasket thickness and flange load.
  • N-8092’s sealabilty performance in a pressurized gas environment is more than 2 x better than N-8094.
  • N-8092 resists creep better than N-8094 to provide better bolt load retention over time. Higher joint tightness = longer- term sealing durability.

Gasket Material

All materials are treated with an anti-stick coating on both sides to better protect the gasket and the machine itself.

MaterialTextureGasket TypeMaterialApplicationMaximum Short Duration Temperatures
NCA-45Cork GasketCork/ Synthetic Rubber BlendMedium Oil Resistance of Most Sealing Application:

  • Valve Covers

  • Oil Pans

  • Transmission Pans

up to 200°C (392°F)
CMP-4000Paper GasketCompressed MicroPore Material, combining a unique synthetic fiber matrix and fully cured Nitrile Butadiene rubber binderExcellent seability and torque retention properties for OEM and Industrial Applications.up to 350°C (650°F)
HFL-171Paper GasketFully cured Nitrile Butadiene rubber binderHeavy-Duty and Industrial Applications:

  • Diesel engine

  • Transmission

  • Refrigeration

  • Piping

up to 290°C (550°F)
HFL-781Paper GasketControlled swell gasket material with Styrene Butadiene and natural rubber bindersHeavy-Duty Oil Sealing Applications:

  • Diesel Engines

  • Oil Pans

  • Front Covers

up to 290°C (550°F)
M5201Paper GasketHigh-Density material with fully cured Nitrile Butadiene rubber binderHeavy-Duty Diesel Engine Applications:

  • Oil Resistance

  • Fuel Resistance

up to 290°C (550°F)
MP-15Paper GasketMicroPore with a Nitrile Butadiene binderExcellent low flange pressure sealing and bolt torque retention for heavy-duty applications:

  • Compressors

  • Diesel Engines

  • Others

up to 205°C (400°F)
N-8092Paper GasketReinforced Cellulose with Nitrile BinderExcellent crush resistance at high flange pressure for Diesel Engines and Compressor Applications:

  • Oil

  • Fuel

  • Water

up to 180°C (350°F)
PF-4SPaper GasketSynthetic Fibers, Advanced Fillers and Nitrile Butadiene BindersVarious Oil, Air, and Coolant Applications:

  • Oil Pans

  • Front Covers

  • Intake Manifold

  • Rear Seals

up to 290°C (550°F)
RN8011Paper GasketLow density Cellulose Fiber Material with High Rubber Filler Content and Nitrile Butadiene Rubber BinderExcellent sealing at Low Flange Pressures for Oil and Water Applications:

  • Engine

  • Transmission Pan Gaskets

  • Water Pumps

  • Environmental Sels

up to 180°C (350°F)
S-8091Paper GasketLatent cure Styrene Butadiene bound material with reinforced Cellulose fiberExcellent sealing for:

  • Oil

  • Fuel

  • Low Pressure Steam

up to 180°C (350°F)
TS-9016Paper GasketFully Cured Styrene Butadiene rubber binder and a blend of Aramid and Cellulose fibersOil and Water Applicationsup to 290°C (550°F)
VB-72Paper GasketMicroPore with a Nitrile Butadiene binderHeavy-duty applications:

  • Valve Body

  • Applications with High Fluid Pressures and Flow Rates Exposure

  • Erosion Resistance

up to 290°C (550°F)
EMC-7201Metal GasketComposite structure of High-Eensity, Fully Cured Nitrile Butadiene bound gasket facings chemically and mechanically fused to an expanded steel coreHigh performance Diesel engine structural joint applications:

  • Gear case

  • Flywheel Housings

  • High Pressure Hyrdaulic Joints

N/A
HTX-900 7%Metal GasketGraphite-Coated, Jigh Temperature facing material chemically and mechanically fused to an expanded steel coreHigh Strength, Thermal Integrity, and Anti-Stick Performance Sealing Applications:

  • Exhaust Manifolds

  • Header

  • Collector

  • EGR System Gaskets

N/A
ML6Metal GasketNon-Asbestos Cellulose Fiber combined with Nitrile Latex and Thermosetting ResinsHigh Performance, non-extruding metal support sealing applications:

  • Intake Manifolds

  • Transmission

  • Braking System

  • Industrial Applictions

up to 205°C (400°F)

* Note: Your email address will be kept confidential.