At CTP we carry a wide variety of tips, adapters, shanks and wear protection bars for excavators, loaders, bulldozers and motor graders. Our broad selection of adapters includes everything from the weld on to bolt on options.

CTP Tips and Adapters deliver strength, durability, performance and productivity. They provide longer wear life which translates into less downtime and lower maintenance costs.

Side Pin Teeth

Reference Chart

FamilyPocket SizeMachines
J20020=2.0”416, 426, 428, 436, 910, 931, 935, 307
J25025=2.5”916-930, 936, 941, 943, 951, 953, 205 THRU 214,225,229,311,312,320
J30030=3.0”950,953B THRU 966, E180, 215, 235, 205 THRU 214, 315,320,322
J35035=3.5”966B, 977, 980, E180, E240, 213B, 215 THRU 229, 320,322,325,330
J40040=4.0”980G,322,325,330
J45045=4.5”983,988,988B,225,229,E300,235,325,330,  345,  350
J55055=5.5”988G, 992, 235, 245, 345, 350, 375
J60060=6.0”990, 992
J70070=7.0”992, 994
J80080=8.0”994

For Reference: 3.0” = J300 FAMILY – 3.5”= J350 Family – 5.5”=J550 Family.

The last three digits describe the family.

Ripper Teeth

Ripper teeth are used in very hostile environments, making it necessary to purchase a quality brand. CTP Branded ripper teeth provide rapid penetration and aggressive ripping angle, along with increased impact resistance. Centerline teeth are used in conditions where penetration is not a problem, compared to penetration teeth which are used in conditions where penetration is difficult.

Part No.TypeApplicationPinLock

6Y0309

Penetration

951, 955, 140, 140G

1368308

1140359

9W2451

Centerline-Short

D8, D8K, D8L, D8N, D8R, D9, D9H, D9N, D9R

6Y3394

8E4743

9W2452

Centerline-Intermediate

D8, D8K, D8L, D8N, D8R, D9, D9H, D9N, D9R

6Y3395

8E4744

4T5452

Penetrator-Intermediate

D8, D8K, D8L, D8N, D8R, D9, D9H, D9N, D9R

6Y3396

8E4745

6Y0352

Centerline-Intermediate

D5, D6, D7, 973, 977, 983,14G,16G

1140358

1140359

6Y0359

Penetrator-Long

D5, D6, D7, 973, 977, 983, 14G, 16G

1140358

1140359

4T4453

Centerline-Long

D8, D8K, D8L, D8N, D8R, D9, D9H, D9N, D9R

6Y3394

8E4743

4T4501

Centerline-Short

D9L, D10, D11

6Y1204

6Y1202

4T4502

Centerline-Intermediate

D9L, D10, D11

6Y1204

6Y1202

4T5501

Penetrator-Short

D9L, D10, D11

6Y1204

6Y1202

4T5502

Penetrator-Sharp

D9L, D10, D11

6Y1204

6Y1202

4T5503

Penetrator-Long

D9L, D10, D11

3G0500

N/A

8E8503

Centerline-Long

D9L, D9R, D9T, D10, D10N, D10R, D10T, D11

6Y1204

6Y1202

9W4552

Centerline-Intermediate

D11

9N4245

6Y1205

9W4551

Centerline-Short

D11

9N4245

6Y1205

6Y3552

Penetrator-Intermediate

D11

9N4245

6Y1205

Ripper Shanks

Shank Protectors

shank-protectors

Tip and adapter are one integrated piece for easy installation and lower initial costs.

Part No.ModelPinLock
6J8814D8K6Y33948E4743
6Y8960D11N6Y120486Y1202

Shank Protectors

adapter-shanks

Part No.NoseApplication
8E84189U9694D8, D8L/N/K/R, D9, D9N, D9R, D9H
1U3630D9L, D10, D11
1038115D9L, D9R, D10, D11

Bucket Sidebar Protectors

bucket-sidebar-protectors

Provide protection for the sides of the bucket.

ModelSidebar ProtectorPinRetainer Ass
980F, 980G1358246 (2)1359292 (4)1140359 (4)
988B/F/G9J9600 (2)1359350 (4)1140359 (4)
990, 992C/D/G1U0740 (2)1330738 (4)1078559 (4)
966G, 972G1358246 (4)1359292 (8)1140359 (8)
385B/C, 980H, 980K1250800 (2)8E4708(4)4T4707(4)
320C, 320D1122489 (2)1122490 (4)1320999 (4)

Bolt on Unitooth

bolt-on-unitooth

Tip and adapter are one integrated piece for easy installation and lower initial costs.

Part No.FamilyBoltNut
1358203J2004F36564K0367
1U1857J2508J29288J2933
1U1877J3008J29288J2933
8E1637J3008J29288J2933
8J6207J2005J47712J3506
132472015929538T4778

Bolt on Center Adapter-2 holes

bolt-on-unitooth

Provides for a good protection of the blade, used where no smooth finish is required.

FamilyModelPart No.BoltNut
J200416, 426, 428, 4368E21844F36564K0367
J200938, 939, 914G9J42075J47712J3506
J250916, 920, 926, 930, 936, 941, 943, 951, 953, IT18, IT281U02578J29288J2933
J300944, 950, 953B, 953C1U03078J29288J2933
J300944, 950B/E/F4T43075P81368J2933
J300 966C3G93075P83615P8362
J350966C, 970F, 973, 9773G33575P83615P8362
J350980A/B/C/G/F1U13575P83615P8362

Bolt on Center Adapter-3 Holes

bolt-on-corner-adapter

Used where no smooth finish is required, provides for a good protection of the blade,
minimizes the risk of breakage or loss.

FamilyModelPart No.BoltNutPin
J300966C3G53078J29288J29331073308
J3509773G13578J29288J29331140358

Flush Mounted Adapters

bolt-on-corner-adapter

Recommended where a good penetration is required, easy to clean, flat bucket bottom leaves a smooth finish.

Part No.FamilyPositionModel
J200416, 426, 428, 910, 931, 935Center4T1204
J250930, 936, 941, 943, 951, 953Center1U1254
J300950, 955, 963, 966CCenter1U1304
J350966D, 973, 977, 980Center1U1354
J400980Center1073404
J460983, 988Center8E0464
J460983, 988Right8E0465
J460983, 988Left8E0466

Weld on Bottom Strap

weld-on-bottom-strap

Good protection of the blade, provides for good excavation.

FamilyPart No.Position
J2008J7525Center
J2503G0169Center
J3009J8929Center
J3501U1352Left
J3501U1350Center
J350 1U1351Right

Shanks and Pins for Motor Graders

Bolt on Corner Adapter

bolt-on-corner-adapter

Prevent the edge from scalloping
between the teeth. Reduces stress,
adding service life in high-wear applications and leaves a cleaner
work surface.

FamilyModelLeftRightBoltNut
J200910, 931, 935, IT121U22081U22096F01962J3505
J250916, 920, 926, 930, 936, 941, 943, 951, 953, IT18, IT283G42583G42594J90588J2933
J300944, 950/B/E/F, 960F3G43083G43096V65355P8362
J300953B/C, 9633G43083G43094J90588J2933
J300966C3G83083G83095P88235P8362
J350 960F, 963B, 966D/E, 966, 970F, 973, 9773G53583G53595P88235P8362
J350980A/B/C/F/G1U13581U13596V83605P8362

Bolt on Corner Adapter

2 bolt corner adapters

FamilyModelLeftRightBoltBoltNut
J250920, 924F, 926, 928/F/G 930, 936/B/E/F, 938F, 938, 941, 943, 951, 9536I92506I92514J90584F40422J3507
J300944, 950, 953, 953C963, 950B/E/F, 960F8E53088E53098T90796V83603K9770
J350963, 966, 973, 9778E53588E53595P83616V65353K9770
J400/J460980, 9886I82446I82438T90796V83603K9770

Heavy Duty Adapters

heavy-duty-adapters

Recommended for high impact conditions.

FamilyModelPart No.Position

J350

966

1359356

Left

1359354

Center

1359355

Right

J400

980

1258406

Left

1258404

Center

1258405

Right

J460

988

1140466

Left

1140464

Center

1140465

Right

J550

990, 992

1073556

Left

1073554

Center

1073555

Right

Weld on Double Strapped Adapters

weld-on-bottom-strap

These adapters have an excellent hold, along with good protection of the blade. Provides for an easy and quick change of teeth.

Part No.Part PositionFamily
6Y3224CenterJ220
6Y3254CenterJ250
9W1304CenterJ300
3G6304CenterJ300
3G6305RightJ300
3G6306LeftJ300
6I6354CenterJ350
6I6355RightJ350
6I6356LeftJ350
6I6404CenterJ400
6I6405RightJ400
6I6406LeftJ400
1590464CenterJ460
8E3466LeftJ460
8E3464CenterJ460
8E3465RightJ460
6I6554CenterJ550
6I6604CenterJ600
6I6605RightJ600
8E9490CenterJ300
6I6554CenterJ550
3G8354CenterJ350
3G8355RightJ350
3G8356LeftJ350
8E6464CenterJ460
3G9494CenterJ550
1711704CenterJ700
6I8804CenterJ800